9: Ethernet Device Management
SLM User Guide
172
Syntax
set ethernetdevice port <Device Name or IP Address> portnumber <Port
Number> <one or more parameters>
Parameters
[name <New Port Name>]
[state <on|off|cyclepower>]
(available for SLP, SLB and Spider Duo only)
Powers Ethernet device port on or off.
Examples
To power up SLP outlet 2:
set eth port slp-sunset po 2 state on
You may specify a comma separated outlet list to control multiple outlet at once.
To power up SLP outlet port list 1-3,6,8-14:
set eth port slp-sunset po 1-3,6,8-14 state on
Description
Finds a port by device name or IP address with the port number and modifies port parameters.
set ethernetdevice sync
Syntax
set ethernetdevice sync <Device Name or IP Address> action <read|write>
Description
Finds an Ethernet device using device name or IP address and synchronizes device information.
show device
Note:
Entries are not case sensitive.
Syntax
show device <device name>
Description
Searches for and displays Ethernet or managed devices by device name.
show device all
Syntax
show device all
show device
Description
Displays all Ethernet and managed devices.
show ethernetdevice account
Syntax
show ethernetdevice account <accountName>
Summary of Contents for SLM
Page 152: ...9 Ethernet Device Management SLM User Guide 152 Figure 9 19 Device Page Persistent Connection ...
Page 237: ...11 Operation and Maintenance SLM User Guide 237 Figure 11 29 Services Page Status Tab ...
Page 238: ...11 Operation and Maintenance SLM User Guide 238 Continuation of Figure 11 29 part 2 of 3 ...
Page 359: ...SLM User Guide 359 Description Shows the progress of background tasks ...