Lantronix SLM User Manual Download Page 278

Page: 278 / 370

11: Operation and Maintenance

SLM User Guide

278

3. To save, click the

Submit

button.

4. To see the status of the copy process if you are copying multiple files at the same time, click

the

Progress

button above the menu.

Setting up NFS

You can import files from or export files to a remote NFS server. The administrator defines the

remote and local directories and read/write permissions.

To set up NFS:

1. On the menu, click

Files

and then the

NFS

tab. The following page opens:

Figure 11-75 File Management Page - NFS Tab

2. Enter the following information for importing a file:

Note:

The first three lines are for mounting remote NFS directories (the SLM functions

as an NFS client). Once the directory is mounted, the SLM can import files from that share
point.

Path

The default path on the server for obtaining firmware upgrade files and getting and

putting configuration save files.

Login

The user ID for accessing the FTP or SFTP server. May be blank.

Password and Retype

The FTP or SFTP user password.

Connect Timeout
(secs)

The number of seconds after which the connection attempt times out. Default is

60.

Download Timeout
(secs)

The number of seconds after which the download attempt times out. Default is

180.

Setting

Description

Summary of Contents for SLM



















































































































































































































































































































































































Search results

Summary of Contents for SLM

Reviews:

Brands by name

Popular brands

Lantronix SLM, User Manual

Search results

Summary of Contents for SLM

Reviews:

Brands by name

Popular brands