8: User Management
SLM User Guide
102
To configure the SLM to use NIS to authenticate users:
1. On the menu, click
Configuration > Authentication > NIS
. The following page opens.
Figure 8-3 NIS Authentication Page - Configure Tab
2. Enter the following:
Table 8-4 NIS Authentication - Configure Tab
3. To save, click the
Update
button. A confirmation message displays.
NIS Authentication
Page Setting
Description
Domain
The NIS domain of the SLM must be the same as the NIS domain of the NIS server.
Master Server
(required)
The IP address or hostname of the master server.
Slave
Server #1 - 5
The IP addresses or hostnames of up to five slave servers.
Broadcast for Server Select the check box for the SLM to send a broadcast datagram to find the NIS
Server on the local network.
Enabled
Displays selected if you previously enabled this method on the User Authentication
page or on this page. To configure this authentication method but not enable it, clear
the check box.
Note:
You can enable this authentication method here or on the User Authentication
page. If you enable it here, it is assigned the lowest priority on the User
Authentication page.
Summary of Contents for SLM
Page 152: ...9 Ethernet Device Management SLM User Guide 152 Figure 9 19 Device Page Persistent Connection ...
Page 237: ...11 Operation and Maintenance SLM User Guide 237 Figure 11 29 Services Page Status Tab ...
Page 238: ...11 Operation and Maintenance SLM User Guide 238 Continuation of Figure 11 29 part 2 of 3 ...
Page 359: ...SLM User Guide 359 Description Shows the progress of background tasks ...