11: Operation and Maintenance
SLM User Guide
266
To define alarms:
1. On the menu, click
Events
. The following page opens:
Figure 11-62 Event Management Page - Events Tab
2. Enter the following information:
Table 11-63 Event Management - Events Tab - Alarm Type
3. Click the
Define Alarm
button. The alarm displays in the
Alarm
list on the right.
4. Enter the following information:
Setting
Description
Alarm Type
Select one of the following:
email:
Sends an email to the specified email address with details of the event that
has been triggered.
trap:
Sends a notification of a critical event to a specified IP address.
syslog:
Writes an entry into the syslog with details of the event.
IP/email address
For an Email alarm:
The email address where notifications go.
For a trap:
The IP address of the device to which notifications go.
For a syslog:
Leave blank.
Community
For a trap:
The SNMP community of the device to which the trap is sent. The
default is public.
Example:
If the alarm type is Trap, and the IP address is 172.19.100.123, the
SNMP community name should be the SNMP community of the device
172.19.100.123. Otherwise the device will not receive the trap.
Summary of Contents for SLM
Page 152: ...9 Ethernet Device Management SLM User Guide 152 Figure 9 19 Device Page Persistent Connection ...
Page 237: ...11 Operation and Maintenance SLM User Guide 237 Figure 11 29 Services Page Status Tab ...
Page 238: ...11 Operation and Maintenance SLM User Guide 238 Continuation of Figure 11 29 part 2 of 3 ...
Page 359: ...SLM User Guide 359 Description Shows the progress of background tasks ...