3: Quick Setup
SLM User Guide
41
Table 3-13 Network Port Settings
3. To save your entries, click
Apply
. Clicking Apply commits these changes immediately.
Next, enter network gateway information.
To enter gateway information:
1. On the Network - Settings page, click the Gateways tab. The following page opens:
Figure 3-14 Network Settings -Gateways Tab
Setting
Description
Network Port Settings Disabled
: This is the default setting for Network Port 2.
Obtain from DHCP
: Acquires IP address, subnet mask, and gateway from the
DHCP server. (The DHCP server may provide the gateway, depending on its
setup.) This is the default setting for Network Port 1. If you select this option, skip
to step 3.
Obtain from BOOTP
: Lets a network node request configuration information from
a BOOTP "server" node. Skip to step 3.
Specify
: Requires you to assign a static IP address manually. The administrator
generally provides the IP address.
IP Address
If specifying an IP address, enter an IP address that will be within a valid range,
unique to your network, and in the same subnet mask as your workstation. There
is no default.
Note:
Enter all IP addresses in dot quad notation.
Subnet Mask
If specifying an IP address, enter the network segment on which the SLM resides.
There is no default.
Summary of Contents for SLM
Page 152: ...9 Ethernet Device Management SLM User Guide 152 Figure 9 19 Device Page Persistent Connection ...
Page 237: ...11 Operation and Maintenance SLM User Guide 237 Figure 11 29 Services Page Status Tab ...
Page 238: ...11 Operation and Maintenance SLM User Guide 238 Continuation of Figure 11 29 part 2 of 3 ...
Page 359: ...SLM User Guide 359 Description Shows the progress of background tasks ...