Lantronix SLM, User Manual

Page: 161 / 370

9: Ethernet Device Management
SLM User Guide 161
Figure 9-30 All Ethernet Devices Page -- Traps Tab
2. Review the following information:
Table 9-31 Trap Settings
To clear or export a trap log:
1. On the top part of the page, enter the following:
Table 9-32 Clear or Export Trap Log Settings
Ethernet Device
Setting Description
IP Address
IP address of the Ethernet device generating the trap.
Time
Time the Ethernet device generated the trap.
Object ID
Uniquely identifies the trap among all possible traps from all SNMP-capable devices;
it is derived from the trap.
Trap Type
Category of trap, for example, device cold/warm start, device Ethernet link up/down,
device authentication failure; it is derived from the trap.
Trap Community
Community value.
Device
Name of the device sending the trap; it is derived by associating the sender's IP
address to a device name in the SLM database.
Description
Message text in the trap.
Contents
The entire contents of the SNMP trap.
Trap Log Setting Description
Clear Trap Log Select the check box to clear the trap log.
Export Trap Log To export a trap log, select the check box and enter the range of dates the log you want
to export should cover.
Filename Enter the name of the log file to export and select one or both of the following options:
Overwrite Existing File
: Replace an existing log file with the one being exported.
Remove Exported Rows
: Removes exported rows of Trap data from the database so
they will not be perceived as new traps in future viewings.