Lantronix SLM User Manual Download Page 221

Page: 221 / 370

11: Operation and Maintenance

SLM User Guide

221

2. From the

Field

drop-down list, select one of the following search fields and enter the

corresponding

Value

. If you omit the value, the search returns all devices.

Note:

Searches are not case sensitive.

Table 11-12 Search for Users

3. Click the

Search

button. The Search Results - Users page opens, listing all users who meet

the search criteria.

Figure 11-13 Example of a Search by User

The following information (if available) displays for each user retrieved by the search.

Table 11-14 Search Results - Users

User Setting

Description

User Fields

Name

: The name of the user for whom you are searching. You need type only as

many characters as will identify the user. For example, s returns all users with

names starting with s.

E-Mail

: E-mail address of the user for whom you are searching.

User Setting

Description

Name

The user name for logging in to the SLM.

Email Address

User's email address; may be used for event notification.

Config Network

Yes

indicates the user can open the Network Settings page and configure network

settings.

Config
Authentication

Yes

indicates the user can select and prioritize authentication methods and related

settings.

Config Services

Yes

indicates the user can configure services such as date and time and SNMP

Agent & syslog and update SLCs to which the user has access.

Device Management

Yes

indicates the user can configure settings for auto-detecting devices and ports

and for managing alternate SLMs.

Config Accounts

Yes

indicates the user can add, update, and delete all accounts and grant account

permissions.

Config Events

Yes

indicates the user can set alarms and triggers.

Config Log Files

Yes

indicates the user can view, copy, and delete various log files.

Authentication

Indicates whether authentication for this user is

Local Only

Remote Only

Local

& Remote

, or

Disabled

Password Change

Yes

indicates that the user can use the current password indefinitely. Selected by

default.

Summary of Contents for SLM



















































































































































































































































































































































































Search results

Summary of Contents for SLM

Reviews:

Brands by name

Popular brands

Lantronix SLM, User Manual

Search results

Summary of Contents for SLM

Reviews:

Brands by name

Popular brands