Lantronix SLM User Manual Download Page 275

Page: 275 / 370

11: Operation and Maintenance

SLM User Guide

275

To delete a file:

Note:

You cannot delete an active syslog file.

1. On the menu, click

Files

and then the type of file. The files of that type in the database display

in the list box.

2. Select

Delete

and then the file you want to delete. To select multiple files, use

Shift+click

Ctrl+click

3. Click the

Submit

button.

4. In response to the request for confirmation, click

. The file is no longer in the list.

5. To see the status of the copy process if you are deleting multiple files at the same time, click
the

Progress

button above the menu.

To rename a file:

Note:

You cannot rename an active syslog file.

1. On the menu, click

Files

and then the type of file you want to rename. The files of that type

display in the list box.

2. Select

Rename

and then the file you want to rename.

3. To rename a file to a name already in use in the directory, select the

Overwrite existing file

check box.

Note:

If you try to rename a file to a name already in use in that directory, the

rename will fail unless you select Overwrite existing file check box.

4. Click the

Submit

button. A confirmation message displays.

Exporting, Uploading, and Downloading Files

Administrators can export (copy), upload, and download files.

To open the Files page:

1. On the menu, click

Files

and then the file type you want to export. The following page opens:

Summary of Contents for SLM



















































































































































































































































































































































































Search results

Summary of Contents for SLM

Reviews:

Brands by name

Popular brands

Lantronix SLM, User Manual

Search results

Summary of Contents for SLM

Reviews:

Brands by name

Popular brands