manualshive.com logo in svg

Lantronix SLM, User Manual

Share
Download
Lantronix SLM User Manual Download Page 272

11: Operation and Maintenance

SLM User Guide

272

SLC/SLB FW Upgrade Files: 

Files for upgrading the SLC/SLB's firmware. 

SLP FW Upgrade Files: 

Files for upgrading the SLP's firmware.

Spider FW Upgrade Files: 

Files for upgrading the Spider's firmware.

UDS/SDS FW Upgrade Files:

 Files for upgrading the UDS's firmware.

WiBox FW Upgrade Files:

 Files for upgrading the WiBox's firmware.

Note:

You can obtain the most up-to-date firmware and release notes for the unit from 

the Lantronix web site (

www.lantronix.com

) or by using anonymous FTP 

(

ftp.lantronix.com

). 

Configuration Files

SLM Configuration Files: 

Contain all of the SLM's settings that have been saved to file. They 

can be backed up to a location that is not on the SLM.

SLC/SLB Configuration Files:

 Contain all of the SLC's settings that have been saved to file. 

They can be backed up to a location that is not on the SLC. 

SLC/SLB Sysconfig Files:

 Contain status information about the SLC.

Spider Configuration Files: 

Contains all of a Spider's settings saved in a file.  This can be 

used to restore another Spider to the same settings, or backed up and later used to restore the 

original Spider.

Spider Sysconfig Files: 

Viewable system configuration of SLM managed Spider devices.

UDS/SDS Sysconfig Files: 

Viewable system configuration of SLM managed UDS devices.

UDS/SDS Applet Files:

 Applet files for installation on UDS devices.

Log Files

SLM Syslog Files: 

Contain information about all activity on the SLM (for example, login 

attempts, alarms, and diagnostics).

SLM Auditlog Files:

 Every successful login, logout, and command on the command line 

interface and web is logged into a database table. The administrator reads this information 

from the CLI or web and creates an audit report for one or multiple users.

SLC/SLB Syslog Files:

 Contain information about all activity on the SLC, for example, login 

attempts, alarms, and diagnostics.

SLC/SLB Auditlog Files: 

Contain a log of all actions that have changed the configuration of 

the SLC.

SLC/SLB Portlog Files: 

Contain a log of all actions and data on a specific port.

Persistent Log Files: 

Contain data about the activity of persistent connections.

Session Files

SLC/SLB Port Active Files: 

Contain session log files for currently active Secure Channel 

sessions to SLC device ports.

SLC/SLB Port Saved Files: 

Contain archived session log files for Secure Channel sessions 

to SLC device ports. The files in the SLC/SLB Port Active Files directory move into the SLC/

SLB Port Saved Files directory after the session ends.

Summary of Contents for SLM



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands