PAGE 12
WARNING: To reduce the risk of electrical shock or injuries to persons:
[1]
An appliance should never be left unattended when plugged in. Unplug from
outlet when not in use.
[2]
Close supervision is necessary when this unit is used by or near children or
disabled persons.
[3]
Use this elliptical only for its intended use as described in this manual.
[4]
Never operate this elliptical if it has a damaged cord or plug, if it is not working
properly, or if it has been damaged. Call your selling dealer immediately for
examination and repair.
[5]
Keep the power cord away from heated surfaces. Be sure the line cord has plenty
of slack and does not get pinched underneath the elliptical.
[6]
Never drop or insert any object into any opening. Be sure no objects are near or
underneath the elliptical
[7]
Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
[8]
Connect this appliance to a properly grounded dedicated outlet only.
[9]
To disconnect, press the OFF button, and unplug the unit from the wall outlet.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding
provides a path of least resistance for electric current to reduce risk of electrical shock.
This product is equipped with a cord having an equipment grounding conductor and
a grounding plug. The plug must be plugged into an outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
120 VOLT ELLIPTIMILLS
Ellipticals marked 120 VAC are intended for use in a nominal 120-volt circuit with a
grounding plug. Make sure the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product.
IMPORTANT OPERATING SAFETY INSTRUCTIONS
Summary of Contents for ELLIPTIMILL E8
