Landice ELLIPTIMILL E8, Service Manual

Page: 37 / 68

PAGE 37
Brake Motor
The brake motor controls the resistance level of your work out.
Brake Motor Cable
Attaches to the brake motor and brake wheel. This cable increases/decreases resistance
when the brake motor engages. The cable will move internal components inside the
brake wheel to adjust your resistance.
Central Shaft Cover
The cover is placed over the wheel and crank shaft and is held in by two screws.
Crank Arm
The crank arm attaches to the crank shaft and stride arm assembly. This arm corresponds
the movement of the stride arm with the crank shaft.
Isolation bearing
Isolates the crack arm from the crank bearing to prevent metal on metal noise.
Crank bearing
The bearing is part of the crank assembly. The crank side arm attaches to the bearing for
stride movement.
Crank Shaft Assembly
The crank shaft allows stride movement. The assembly consists of the shaft, drive wheel
& drive pulley assembly, crank arm pinion, pedal roller, crank bearings, and hardware.
Crossbar Control Heart Rate (C.H.R.)
Heart contact handgrip will provide the user heart rate reading during use.
Drive Belt
The drive belt will rotate the drive pulley assembly and braking system.
Drive Pulley Assembly
Drive belt attaches to this assembly. Also consist of the arm pinion. This controls rotation
to the crank shaft assembly.
DEFINITION OF PARTS