manualshive.com logo in svg

Lake Shore Cryotronics Measure Ready M91 FastHall, User Manual

Share
Download
Lake Shore Cryotronics Measure Ready M91 FastHall User Manual Download Page 38

28

 

c

HAPTER

 2: 

Installation

MeasureReady™ M91 FastHall™ Measurement Controller

2.3  Front Panel

The MeasureReady™ M91 FastHall™ measurement controller has a 5 in capacitive 
touch, color TFT display with LED backlight, which is used to display relevant output 
settings and the instrument state.

No measurements can be started from the front panel screen; it is used only to display 
high-level measurement results.

FIGURE 2-1   

Front panel

TABLE 2-1   

Front panel connections

Connector

Description

1

Power button

The power button puts the instrument into sleep mode.

2

TiltView™ touchscreen

The screen adjusts from a 0° to a 47° viewing angle, whether mounted in a 
rack or on a bench top.

2.3.1 TiltView™  
Touchscreen

The TiltView™ feature makes seeing the screen and operating the touch interface 
comfortable from any angle, even when mounted in a rack. The screen adjusts from a 
0° to a 47° viewing angle, whether mounted in a rack or on a bench top.

FIGURE 2-2   

TiltView™ angle comparison

Summary of Contents for Measure Ready M91 FastHall




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands