manualshive.com logo in svg

Lake Shore Cryotronics Measure Ready M91 FastHall, User Manual

Share
Download
Lake Shore Cryotronics Measure Ready M91 FastHall User Manual Download Page 161

  

    

151

 

                                                        

   

|

   

www.lakeshore.com

Chapter 6: Service

6.1  Overview

This chapter provides basic service information for the MeasureReady™ M91 
FastHall™ measurement controller. Customer service of the product is limited to the 
information presented in this chapter. Lake Shore trained service personnel should be 
consulted if the instrument requires repair.

6.2  USB 
Troubleshooting

This section provides USB interface troubleshooting for issues that arise with new 
installations, existing installations, and intermittent lockups. 

6.2.1 New Installation

 1. Check that the instrument’s interface is set to USB.
 2. Check that the USB driver is installed properly and that the device is functioning. 

In Microsoft Windows®, the device status can be checked using Device Manager 
by right-clicking 

Lake Shore Instrument

 under Ports (COM & LPT) or Other 

Devices and then clicking 

Properties

. Refer to section 4.4.1.3 for details on 

installing the USB driver.

 3. Check that the correct com port is being used. In Microsoft Windows®, the com 

port number can be checked using Device Manager under Ports (COM & LPT).

 4. Check that the correct settings are being used for communication. Refer to  

section 4.4.1.3 for details on installing the USB driver.

 5. Check cable connections and length.
 6. Send the message terminator.
 7. Send the entire message string at one time including the terminator. (Many ter-

minal emulation programs do not.)

 8. Send only one simple command at a time until communication is established.
 9. Be sure to spell commands correctly and use proper syntax.

6.2.2 Existing 
Installation No Longer 
Working

 1. Power the instrument off, then on again to see if it is a soft failure.
 2. Power the computer off, then on again to see if communication port is locked up.
 3. Check all cable connections.
 4. Check that the com port assignment has not been changed. In Microsoft Win-

dows®, the com port number can be checked using Device Manager under Ports 
(COM & LPT).

 5. Check that the USB driver is installed properly and that the device is functioning. 

In Microsoft Windows®, the device status can be checked using Device Manager 
by right-clicking 

Lake Shore Instrument

 under Ports (COM & LPT) or Other 

Devices and then clicking Properties.

6.2.3 Intermittent 
Lockups

 1. Check cable connections and length.
 2. Increase the delay between all commands to 100 ms to make sure the instru-

ment is not being overloaded.

 3. Ensure that the USB cable is not unplugged and that the M91 is not powered 

down while the com port is open. The USB driver creates a com port when the 
USB connection is detected, and removes the com port when the USB connection 
is no longer detected. Removing the com port while in use by software can cause 
the software to lock up or crash.

Summary of Contents for Measure Ready M91 FastHall




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands