LMFC250 FINE CRUSHER MANUAL
6.5.7
Crusher will not start
Follow the following steps, if the Crusher will not start.
Step 1:
Check the electrical supply to the Crusher and have an electrician check all the electrical connections to the Crusher
and control buttons and specifically the motor. Repair any electrical failure found between the supply and the machine.
Step 2:
To replace a faulty motor, loosen the four (4) belt tensioning bolts, nuts and washers and lever the motor upwards to
slacken the V belts, so they can be removed.
Step 3:
Disconnect the cables to the motor. Undo and remove the four (4) motor mounting bolts and nuts holding the motor
to the mounting plate. Replace the motor with a new one. Re
-
install all parts in reverse order.
Step 4:
Re
-
tension the V belts as per Steps 4 and 5, Item 6.5.6 above.
Belt Tensioning Bolts, Nuts & Washers
Motor
Motor Mounting Bolts & Nuts
5
5
5
32
