11
LMFC250 FINE CRUSHER MANUAL
1.3.5
Definitions and Abbreviations
Shall / Must
the words
“
shall
”
or
“
must
”
is to be understood as mandatory
Should
The word
“
should
”
as recommended but non
-
mandatory
JSA
Job Safety Analysis
MMS
Maintenance Management System (paper or computer based).
kg
Kilograms
kW
KiloWatts
Nm
Newton metres
lb
Pound
kPa
KiloPascals
P.S.I
Pounds per Square Inch
CFM
Cubic Feet per Minute
mm
Millimetres
m
Metres
XX
”
Inch symbol
V
Volts
Hz
Hertz
A
Amps
dBA
Decibel (usually measured at 1 metre from the source)
OEM
Original Equipment Manufacturer
Fig
Figure
I/O
Input/output, refers to the communication between information processing
systems
AWST
Australian Western Standard Time
AWDT
Australian Western Daylight Time
PLC
Programmable Logic Controller
ISPM 15
The 'International Standards for Phytosanitary Measures Publication
No.15: Guidelines for Regulating Wood Packaging Material in International
Trade
’
Brackets:
All sizes and pressures are metric units, i.e. mm or kPa. Where imperial units have been included they are shown
in normal brackets, i.e. 15.8 mm
(5/8”).
It may also be a clarification of a number, i.e. two (2).
Square Brackets:
[ ] Indicate an Item number. These are generally associated with an exploded drawing in the parts
section of this manual. The Square Brackets [ ] will always be preceded by a Figure (Fig) number associated with that part.
1.3.6
Special Characters
1.3.7
Outline of Manual
The content of this manual contains important information for the installation, commissioning, operation and maintenance of
the LMFC 250 Jaw Crusher. Included are Spare Parts Lists and procedures to enable the user to purchase and fit items
which may be required to routinely maintain and keep the machine in working order.
