10
LMFC250 FINE CRUSHER MANUAL
1.3.4
Definition of Symbols Used
The following table shows other symbols that may be used throughout this manual. They will always
appear under the first heading, General Safety Rules.
Symbol
Definition
Action Required
Assistance is required
The required task should be undertaken by two (2) or more people
Look
Check for abnormalities, leaks, color deterioration caused by heat or other
conditions
Listen
Check for air leaks, abnormal or unusual noise, vibration
Touch (Limited)
Keep away from any moving parts, vibration, hot surfaces, etc.
Smell
Check for leaks, burning
Measure Temperature
Using hand held Infrared or Laser equipment, or permanently installed gauges
Measure Pressure
Using permanently installed gauges
Measure in mm
Using appropriate measuring tool
Record
Take notes or complete a form for addition to the MMS
Adjust
Check adjustments and/or torque settings
Special Tools
Special tools are required, (i.e. torque wrench)
Specialist Contractor
Specialist Contractor required
Permits are required
For hot work, confined space, working at height, etc.
S
