The following details outline general information relating to parts used on the LMFC 250 Crusher.
2.3
Characteristics of the Component Parts
2.3.1
Electric Motor
7.5 kW, 4 pole, 380
-
415 V 50 Hz three phase AC, or other power configurations as required.
LMFC250 FINE CRUSHER MANUAL
2.3.2
Gearbox
Not applicable to this equipment.
2.3.3
Pneunmatic Equipment
Not applicable to this equipment.
2.3.4
Extraction System
Not applicable to this equipment. Done by customer
2.3.4
Hydrostatic
Not applicable to this equipment.
2.3.5
Savety Devices
For safety purposes, the Crusher cannot operate without the central control box of the complete installation. The crusher will
start via the central control box after the dust extractor and sampler have started.
2.3.6
Control Devices
The Crusher cannot be controlled manually.
The sections that follow contain lists of parts recommended to, Commission, Operate and Maintain the LMFC 250 Crusher.
2.4
Spare Parts Schedules
2.4.1
Recommended Commissioning Spares
Not applicable, no commissioning spares are recommended for this machine.
2.4.2
Recommended Operating/Maintenance Spares
The following Spare Parts List shows the parts recommended to be held in stock for 12 months operation and general mainte-
nance of the LMFC 250 Crusher. It does not include parts that may be required during a major overhaul. Refer to the compre-
hensive Parts List in Section 9 of this manual.
13
Item
Item No. / Type
Supplier
Quantity
Lead time
Drive Motor
7.5kW
-
4P
-
132M
-
IP55
-
400/690V
-
50Hz
-
B3R
WEG
1
1 Week
V belts
SPB 1615 ld/17x1575 Li B62, antistatic ISO1813
Optibelt
2
1 Week
Jaw plates (Serrated)
LAARMANN
2
1 Week
Liner, side plate LH
LAARMANN
1
1 Week
Liner, side plate RH
LAARMANN
1
1 Week
2.4.3
Recommended Critical Insurance Spares
Not applicable. No critical insurance spares are recommended for this machine.
