SKY899
Installation Manual
009-11900-001
Maintenance - Page 4-3
Revision F
July 18, 2013
Access the Service Menu on a WX-1000/SKY497 display by holding soft-keys (1) and (2) (the left two
buttons) depressed as the system is turned on. Hold the buttons until the Service Menu is displayed. The
Service Menu is shown in figure 4-2.
Figure 4-2: Service Menu (WX-1000/SKY497 Display)
Ground Test is available only if squat switch input indicates aircraft is on the ground.
The buttons perform the following operations:
EXIT
- backs up one screen (if in service menu screen it will exit and enter normal/standby mode).
NEXT
- scrolls to the next item.
SEL
- selects the highlighted item.
PREV
- scrolls to the previous item.
The individual menu items are explained in the following paragraphs.
NOTE
Service Menu screens are shown for documentation purposes only. Each
system may be configured differently and live data will correspond to the
sensors installed in a particular aircraft.
4.4.1 Setup
The setup menu configures the SKY899 system to your specific installation. Setup covers the aircraft
type, antenna system, audio level, ARINC 429 ports, and avionics equipment. In the setup menu, the
current choice is displayed in asterisks (i.e., Aircraft Type *Fixed Wing*). Select setup from the service
menu screen.
The Setup menu provides the following choices:
Figure 4-3: Setup Menu
The following menu will appear when you exit the setup menu if changes were made in the system
configuration. Save changes will store configuration settings in system configuration module. Revert to
old settings will restore the system configuration back to the last saved configuration.
The document reference is online, please check the correspondence between the online documentation and the printed version.