SKY899
Installation Manual
009-11900-001
Maintenance - Page 4-13
Revision F
July 18, 2013
The Software Version menu displays the following:
Figure 4-26: Software Version Menu
4.4.2.2 System Log
The 20 most recent errors detected by the system are saved in the System Log. For each error, the
corresponding error code and run-time of occurrence are saved. The system log, as shown in figure 4-27,
is displayed by selecting that option from the Information Menu.
NOTE
Table 4-3 and Table 4-4 provide a list and description of each error code
(see paragraph 4.6 error messages).
Figure 4-27: System Log Menu
The System Log displays the results in the following format: ## hhhhhh:mm
where:
##
=
Error code.
hhhhhh:mm
=
Run-time (in hours and minutes) when error occurred.
The total elapsed run-time is displayed beside the title in the upper middle portion of the screen (Sys Log
hhhhhh:mm).
With an error highlighted pressing SEL will cause the textual description to appear underneath the error.
If the System Log is empty, the following message is displayed:
NO FAULTS DETECTED
If, due to a failure of non-volatile memory, the System Log cannot be displayed, the following message is
displayed:
DATA NOT AVAILABLE
The document reference is online, please check the correspondence between the online documentation and the printed version.