Kurzweil KDFX, Manual

Page: 21 / 164

A Tour of KDFX
A Simple Studio
2-5
Output Editor
Press the OUTPUT soft button.
The
Output editor
page is the interface to the real world. It determines which of the signals
going through the various KDFX buses show up at the K2500Õs four sets of physical outputs: A,
B, C, and D. These four outputs, all stereo, go to the K2500Õs analog outputs and to the KDS
digital bus. In addition, output A also goes to the K2500Õs AES/EBU digital output.
In this Studio,
Output A
is carrying the Mix Bus, that is, the combination of the outputs of the
four FXBuses (only one of which is in use) and the AuxFX Bus. Output B is carrying FXBus1,
which is the signal
after it passes through the delay on FXBus1, but before it gets to the reverb on
the Aux bus. The other outputs are carrying no signal.
HereÕs a diagram of what this Studio looks like:
Figure 2-1. Structure of Studio 200
EditStudio:OUTPUT||||||||||||||||||||||| |
Mix|Lvl: 0.0dB ||||||Output|A:Mix
Mix|Bal:0%|||||||||Output|B:FXBus1
|||||||||||||||||||Output|C:Off
|||||||||||||||||||Output|D:Off
<more| | INPUT| | FXBUS | AUXFX| | OUTPUT| | more> ||
Program
output A
EQ
AuxFXBus
Big Chamber
FXBus1
4 Tap BPM
-6dB
Mix
+
Physical
output A
-4.5dB
+3.5dB
Output B