Kurzweil KDFX, Manual

Page: 51 / 164

Inside KDFX
Output section
3-19
¥
Off . No output.
¥
PreFX n , which is the signal coming into the FX Preset on FXBus1, 2, 3, or 4. Depending on
how your Inputs are set up, this could be one signal or many. If more than one Input is
assigned to FXBus
n , then all of the EQs and pan/width/balance settings of the Input
modules assigned to the FXBus are active on this signal pathÑbut the FX Preset is not .
¥
FXBus n , the direct output, post-FX Preset (i.e., the return), from any of the four Insert
FXBuses.
¥
Mix , the signal from the Mix output, which can include the sum of any or all of the Insert
FXBuses, and/or the Aux Bus. The Level and Balance parameters on this page control this
output.
¥
AuxFX , the outputs of the Aux Effects bus.
There are no restrictions on the settings on this page. If you like, all four outputs can be
carrying the same signal: PreFX1, for example.
Separate Analog and KDS Outputs
The K2500Õs separate analog outputs (the four pairs) and KDS outputs (also four stereo pairs)
are wired in parallel and are ÒliveÓ at all times. The selectors on the Output page affect both the
separate analog and KDS outputs.
Analog Mix Output
The K2500Õs Analog Mix output, as it always has, combines the four output pairs into a single
stereo analog pair. If a plug is inserted into any of the
other analog output jacks, however, the
signal going to that output jack is removed from the Analog Mix bus, and does not appear at
the Analog Mix output.
The Internal Effects processor is still active on the ÒKDFX-AÓ output bus coming from the
K2500Õs Program Editor, and can be used in conjunction with KDFX. For more information, see
Chapter 6.
Figure 3-9. Analog, KDFX, and AES/EBU outputs
A B C D
Mix out
(analog)
internal Effects
processor
A
(analog/KDS)
(AES/EBU
Ñsee text)
B
(analog/KDS)
C
(analog/KDS)
D
(analog/KDS)
KDFX outputs
K2500 physical
outputs
inserting jack breaks
connection to Mix out