Kurzweil KDFX, Manual

Page: 25 / 164

A Tour of KDFX
A more complex Studio
2-9
Outputs
Finally, press the OUTPUT soft button to get to the Output page. Here we see that the four
physical output pairs all are passing different parts of the studio. If the outputs are connected to
an external mixer, you can treat each of them separately: recording them on different tracks of a
tape deck, sending them to different outboard processors, or mixing them differently in a
monitor mix.
Output A has the Mix bus. This is the combined output of the two FX Buses, plus the reverb on
the AuxFX bus. Its gain and balance (the controls on the left) are at unity.
Output B has the output of FXBus1, that is, the ring-modulated piano, without any reverb.
Output C has the output of FXBus2, the delayed/ßanged ßute, without any reverb.
Output D has the output of the AuxFX bus, which is just the reverb signal, with no dry
component.
Here is the overall structure for this Studio:
Figure 2-2. Structure of Studio 201
EditStudio:OUTPUT||||||||||||||||||||||| |
Mix|Lvl: 0.0dB ||||||Output|A:Mix
Mix|Bal:0%|||||||||Output|B:FXBus1
|||||||||||||||||||Output|C:FXBus2
|||||||||||||||||||Output|D:AuxFX
<more| | INPUT| | FXBUS | AUXFX| | OUTPUT| | more> ||
Program
output A
EQs
FXBus1
Tut Ring Mod
AuxFXBus
MedWarmPlate
FXBus2
Ptc+Flg+Dly145BP
output B
-5dB
Mix
+
Physical
output A
-2.5dB
-9.5dB
Output B
Output C
Output D