A Tour of KDFX
A complex Studio with real-time control
2-13
Press
PARAM2
, youÕll see that the Left and Right LFO1 Rates are
also
under FXMod control.
Go back out of the FXPreset and the Studio, to the SetupÕs
KDFX
page. Here we see that on FX
Bus 2, L Fdbk Lvl has a starting value of 0%, and can be changed, using MIDI controller 26
(Slider F), up to 100%.
Press
FXMOD2
to go to the next page of FXMods, and youÕll see the same slider changing the R
Fdbk Lvl, only in this case the Depth is -100%, meaning the feedback on this channel will be out
of phase with the main signal.
Further down the FXMOD2 page are the assignments to the LFO rates: MIDI controller 25
(Slider E) is assigned to the left and right LFO1 Rates, with minimum values of 0.50 and 0.52
Hz, respectively, and maximum change of 8.25 Hz. Set the feedback level high and you can
really clearly hear the LFO rate changing (but watch out that the effect doesnÕt go into
oscillation at the highest feedback level).
Finally, MIDI Controller 27, our old friend Slider G, controls the Aux Level send on this bus as
well, thereby determining how much reverb will appear on the signal on this bus. There are no
limits to how many FXMods a single Source can be assigned to.
FXBus 3
Press
Edit
, then use the
Chan/Bank
button to select FXBus 3. HereÕs where our breathy ßute
sound is, and itÕs going through a delay FXPreset called 207*Adj Delay.
EditFXPreset:PARAM2|||Dual|Chorus|1|||||
L|Tap|Lvl|:75%||||||R|Tap|Lvl|:75%|
L|Tap|Pan|:-100%||||R|Tap|Pan|:100%
L|LFO|Rate:FXMod||||R|LFO|Rate:FXMod
L|LFODepth:5.0ct||||R|LFODepth:5.0ct
L|Tap|Dly|:4.0ms||||R|Tap|Dly|:4.0ms
<more|
|
PARAM1
|
PARAM2
|
PARAM3
||||||||
more>
L|HF|Damp|:25088Hz||R|HF|Damp|:25088Hz
EditSetup:FXMOD2||||||||||||||All|Zones|
|
Bus:|Param:|||||Adjust:||Source:||Depth:
FX2||R|LFO1Rate||0.52Hz||MIDI25|||8.25H
FX2||Aux|Lvl||||-15.5dB||MIDI27|||15dB
FX3||Fdbk|Level|10%||||||MIDI24|||89%
<more|
|
KDFX||
|
FXMOD2
|
FXMOD3
|
FXMOD4
|
more>
FX2||L|LFO1Rate||0.50Hz||MIDI25|||8.25H
FX2||R|Fdbk|Lvl|0%|||||||MIDI26|||-100%
EditStudio:FXBUS|Size:1|Free:1|<>FXBus:3
FX3||
207*Adj|Delay|||||||
||Aux ||Mix
Wet/Dry|||:50%wet|||Lvl:FXMod|Lvl:0.0dB
Out|Gain||:0.0dB||||Bal:0%||||Bal:0%
Allocation:Auto
<more|
|
INPUT|
|
FXBUS|
|
AUXFX|
|
OUTPUT
|
more>
,
Summary of Contents for KDFX
