Kurzweil KDFX, Manual

Page: 93 / 164

Using the Algorithms
FXMod Diagnostic
5-17
FXMod Diagnostic
This Algorithm allows you to view the current levels of any data sliders, MIDI controls,
switches, or internally generated VAST LFOs, ASRs, FUNs, etc. which are available as
modulation sources. It has no effect on any signal being routed through it.
Up to eight modulation sources may be monitored simultaneously. Meters #1 through #4 can
monitor bipolar sources, meaning sources that can have both positive and negative values. The
range of the bipolar meters is -1 to +1. Four monopolar meters #5 through #8 provide better
resolution, but the range is limited to 0 1. Use the monopolar meters for sources which
you do not expect to go negative.
Eight parameters are provided to connect modulation sources to the meters. The parameter
values are Þxed at ÒNoDpthÓ and have no function except to connect sources to meters.
To use the algorithm, save an FX Preset and Studio containing the Algorithm, then go to one of
the FXMod pages of your Program or Setup (with the Studio selected). Select the FX bus which
contains the FXPreset that uses the FXMod Diagnostic Algorithm, and choose one of the meter
parameters (Bipole N or Monopole N). You will not be able to modify the Adjust or Depth
Þelds, but you can select any source you want. Finally press the Edit button to re-enter the
Studio and Multieffect editor where you can view the meters on parameter page 2.
Bipole1 through Bipole4 attach bipolar modulation sources (those that can go positive or
negative) to the bipolar meters. The parameters are not adjustable.
Monopole5 through Monopole8 attach monopolar modulation sources (can go positive only)
to the monopolar meters. The parameters are not adjustable.