manualshive.com logo in svg

KUHN IND 360P, Maintenance Manual, Page: 5 / 54

Share
Download
KUHN IND 360P Maintenance Manual Download Page 5

5

1.2  GENERAL SAFETY RECOMMANDATIONS

Before operating the machine, always ensure that the machine complies with work safety regulations.

GENERAL

1. Safety decals with recommendations to prevent accidents are placed on the machine.

2. Before carrying out work, ensure that the weighing unit is turned off.

3. Portable telephones can have a harmful effect on the working of the weighing unit.

USE

Before connecting the weighing unit to the tractor:
- check that the electric plug is clean and free from dirt,
- check that the electric circuit is correct.

MAINTENANCE

1. Disconnect from the power source before any work is done on the electrical system.

Before any electric welding is carried out on a machine that is attached
to the tractor, disconnect the tractor alternator and battery. Connect
the earth lead as close as possible to the part to be welded. Never
connect the earth to the chassis if the hopper is to be welded. If this
advice is ignored, then irreparable damage can be caused to the sensors
which connect the hopper and chassis.

Summary of Contents for IND 360P























































Reviews:

No comments