KUHN IND 360P, Maintenance Manual, Page: 31 / 54

31
3.2.2.3 CONFIRMATION OF THE TARE
This function can be used to find the contents of the machine if, when switching on, you confirmed
that the machine was empty although the machine was actually loaded.
Press to display the help page, press a second time to return to TAKE AGAIN THE ORIGINAL
TARE.
Answer YES to retrieve the zero from the factory calibration.
Answer NO to return to the MAINTENANCE MENU without
retrieving the zero from the factory calibration.
After returning to the factory calibration zero, there may be a difference compared with actual machine
contents. This difference can come from the fact that the machine was perfectly empty during calibration
in the factory but the return to zero has been done with a little product still inside the machine.
?
3.2.2.4 DELETING OF THE PROGRAMS
This function allows you to delete all programs memorized by the weighing unit.
Press to display the help page, press again to return to DELETING OF THE PROGRAMS.
Answer YES to delete all programs.
Answer NO to delete nothing and return to the
MAINTENANCE MENU.
?
Do you want to go back to
factory calibration ?
YES NO
Are you sure you want to
delete programms ?
YES NO