KUHN IND 360P Maintenance Manual Download Page 4 | Manualshive

Page: 4 / 54

KUHN IND 360P Maintenance Manual Download Page 4

4

This symbol is used throughout this manual wherever recommendations
are made concerning the safety of others, or good machine operation.

These recommendations must be made known to all machine operators.

PROPER USE OF THE MACHINE

The weighing unit must only be used for work for which it has been designed:

- Indication of the weight contained in the machine with, for the programmable version, the

possibility of programming animal rations.

The weighing unit must not be used for commercial transactions.

Proper use of the machine also means:

- following operation, maintenance and repair recommendations given by the manufacturer,
- using only spare parts, equipment and accessories as designated by the manufacturer.

The weighing unit must only be used, maintained and repaired by competent persons who are familiar
with the machine specifications and are aware of any danger involved.

The operator must observe current legislation concerning:

- accident prevention
- work safety

1. GENERAL

1.1 WARNING

«
...
2
3
4
5
6
...
»

Summary of Contents for IND 360P























































Reviews:

No comments