Kubota RTV1140CPX, Workshop Manual

Page: 50 / 379

GENERAL
RTV1140CPX, WSM
G-29

Direction for Storage
1. When storing the vehicle for a long period, remove the battery
from vehicle, adjust the electrolyte to the proper level (refillable
type only) and store in a dry place out of direct sunlight.
2. The battery self-discharges while it is stored.
Recharge it once every three months in hot seasons and once
every six months in cold seasons.
9Y1210293GEG0037US0
Adjusting Alternator Belt Tension
CAUTION
• Be sure to stop the engine before checking belt tension.
1. Park the vehicle on a flat surface and raise the cargo bed.
2. Stop the engine and remove the key.
3. Apply moderate thumb pressure to belt between pulleys.
4. If tension is incorrect, loosen the alternator mounting bolts and
using a lever placed between the alternator and the engine
block, pull the alternator out until the deflection of the belt falls
within acceptable limits.
5. Replace alternator belt if it is damaged.
9Y1210293GEG0038US0
Adjusting VHT Neutral Spring
1. Park the vehicle on a flat place.
2. Set the parking brake.
3. Shift the range gear shift lever to the neutral position.
4. Lock the hydraulic lift cylinder lever to
"NEUTRAL" position with
restricting plate.
5. Start the engine.
6. Make sure that the rotation speed of the engine returns to the
idling rotation immediately when taking the foot off the pedal,
after depressing the speed control pedal several times.
If the above does not occur immediately, check the speed
control cable.
If cable movement is not smooth, replace the new one.
If cable is OK, adjust the neutral spring tension (length of
tension bolt).
9Y1210293GEG0039US0
Proper alternator belt
tension
Factory specification
A deflection of between 7
to 9 mm (0.28 to 0.34 in.)
when the belt is pressed in
the middle of the span.
(1) Bolt A: Check Belt Tension
B: To Tighten
(1) Neutral Spring
KiSC issued 05, 2014 A