Kubota RTV1140CPX, Workshop Manual

Page: 346 / 379

ELECTRICAL SYSTEM
RTV1140CPX, WSM
8-S3
LIGHTING SYSTEM
Symptom Probable Cause Solution
Reference
Page
Head Light Does Not
Light Fuse blown (15 A) Replace G-41
Combination switch defective Replace 8-S15
Bulb blown Replace G-42
Wiring harness disconnected or improperly
connected (between main switch
ACC terminal
and head light switch, between head light switch
and head light)
Repair or Replace –
Tail Light Does Not
Light Fuse blown (15 A) Replace G-41
Bulb blown Replace G-42
Wiring harness disconnected or improperly
connected (between main switch
ACC terminal
and head light switch, between head light switch
and tail light)
Repair or Replace –
Hazard Light Does
Not Light
(If Equipped) Fuse blown (15 A) Replace G-41
Bulb blown Replace G-42
Wiring harness disconnected or improperly
connected Repair or Replace –
Flasher unit defective Replace –
Hazard switch defective Replace –
Hazard Indicator
Lamp Does Not Light
(If Equipped) Bulb blown Replace G-42
Wiring harness disconnected or improperly
connected Repair or Replace –
Hazard Light Does
Not Flicker (If
Equipped) Flasher unit defective Replace –
Turn Signal Light
Does Not Light
(If Equipped) Fuse blown (15 A) Replace G-41
Bulb blown Replace G-42
Wiring harness disconnected or improperly
connected Repair or Replace –
Flasher unit defective Replace –
Blinker switch defective Replace –
Turn Signal Light
Indicator Lamp Does
Not Light
(If Equipped) Bulb blown Replace G-42
Wiring harness disconnected or improperly
connected (blinker switch and indicator lamp) Repair or Replace –
Turn Signal Light
Does Not Flicker
(If Equipped) Flasher unit defective Replace –
Blinker switch defective Repair or Replace –
Pre-heat Indicator
Lamp Does Not Light
When Main Switch Is
in Pre-heat Position Battery discharged or defective Recharge or Replace G-28
Slow blow fuse blown Replace G-41
Wiring harness disconnected or improperly
connected (between main switch
G terminal and
pre-heat indicator, between pre-heat indicator
and glow plugs)
Repair or Replace –
Main switch defective Replace 8-S9
Pre-heat indicator defective Replace 8-S30
KiSC issued 05, 2014 A