Kubota DMC 8028, Operator'S Manual

Page: 83 / 219

Operation
83
Stubble height
The machine has 2 basic settings:
•
Short stubble height.
•
Long stubble height.
These 2 setting options can be combined with fitting high skids* which
can be used to set the stubble height as follows:
* Extra equipment
→
»Extra equipment« Page 206
When high skids* are fitted, the basic setting of the machine must
always be on “Long stubble height”.
→
»Long stubble height« Page 85
Short stubble height
The following must be done if a short stubble height is required:

Use a suitable tool to remove the pin from the pin bolt.

Remove the pin bolt.
Stubble height Setting - see chapter: Page
30-80 mm (1
3
/
16
’’-3
1
/
8
’’) »Long stubble height« + 20 mm (
3
/
4
’’) skids fitted
85
50-110 mm (2’’-4
5
/
16
’’) »Long stubble height« + 40 mm (1
9
/
16
’’) skids* fitted
85,207
100 mm (4’’) or more
»Long stubble height« + 80 mm (3
1
/
8
’’) skids* fitted
85,207
Pin bolt
Pos. 1
Pos. 2