Kubota DMC 8028 Operator'S Manual Download Page 160

Page: 160 / 219

Maintenance

160

Wheel

After 10 working hours

Thereafter, every season

→

»Maintenance intervals« Page 104



Use a suitable torque wrench adjusted to the torque shown in the
table below.



Place the wrench on the wheel bolts.



Check all the bolts on the wheels and tighten them to the torque
shown.



Check the tire pressure and, if necessary, top up the tire to the
pressure shown in the table below.

WARNING

Do not drive with worn or damaged tires

Do not drive with worn or damaged tires.
Replace worn or damaged tires immediately.
There is a high risk of accidents when driving on public roads with
worn or damaged tires.

Bolts

Check tire pressure

Model

Tire

Dimension

Tire pressure

bar (psi)

Bolt torque

Nm (ft/lbs)

8028-32-36R

8536R

15.0/55 -17

2.6 (37)

300 (220)

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands