Kubota DMC 8028 Operator'S Manual Download Page 66

Page: 66 / 219

Transport on public roads

Checking the

machine

Before traveling on the road the machine should be checked
according to this check list:



Is the machine in the transport mode?



Is the mowing device lifted all the way up?



Are the machine side guards folded in?



Are all hydraulic functions in neutral?



Are the machine attachment points secured by a pin?



Is the tire pressure of the transport wheels correct?



Does the lighting kit of the machine work correctly?

Traveling on

public roads

•

Check the area around the machine before you start. Be sure there
are no children in the machine's hazard area.

•

Do not exceed the maximum permitted speed.

•

Adjust the speed according to the road conditions.

•

Avoid sudden sideways movement of the machine.

•

Make sure that steering and braking ability is sufficient.

Speed when driving

on public roads

When driving on public roads with this machine, the speed must
be less than 40 km/h (25 mph).

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands