Kubota DMC 8028 Operator'S Manual Download Page 183

Page: 183 / 219

Maintenance

183

Cutting disc

As required

→

»Maintenance intervals« Page 104

The cutting discs are replaced as follows:



Activate the tractor hydraulics and raise the machine's cutterbar
fully.



Close the mechanical safety valve.

WARNING

Safety concerning maintenance work on the cutterbar

When working on the cutterbar, the tractor must be stopped and
secured.
This prevents the machine from suddenly starting to rotate.
Failure to follow the safety instructions may result in serious
injuries.

When working on the cutterbar:

•

The P.T.O. is disengaged.

•

Lower the implement to the ground.

•

The hydraulic controls is in neutral.

•

The tractor engine must be stopped.

•

The ignition key is removed.

•

The parking brake is set.

•

Secure the tractor to prevent it from rolling.

Failure to secure the tractor to prevent it from rolling could
endanger lives.

Valve

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands