Kubota DMC 8028 Operator'S Manual Download Page 162

Page: 162 / 219

Maintenance

162

Tarpaulin

Every month

The tarpaulin and auxiliary protection around the cutterbar must be
charged regularly.

The tarpaulin and auxiliary protection are inspected as follows:



Do a visual inspection of machine protection for holes and other
damage.

Protection with visible holes and other damage must be replaced
immediately.

→

»Tarpaulin« Page 205

WARNING

Safety concerning maintenance work on the cutting unit

When working on the cutting unit, the tractor must be stopped and
secured.
This prevents the machine from suddenly starting to rotate.
Failure to follow the safety instructions may result in serious
injuries.

When working on the cutterbar:

•

The P.T.O. is disengaged.

•

Lower the implement to the ground.

•

The hydraulic controls is in neutral.

•

The tractor engine must be stopped.

•

The ignition key is removed.

•

The parking brake is set.

•

Secure the tractor to prevent it from rolling.

Failure to secure the tractor to prevent it from rolling could
endanger lives.

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands