Kubota DMC 8028 Operator'S Manual Download Page 81

Page: 81 / 219

Operation

The recommended distance between the rollers shall be 5 mm (

’’).

The distance between rollers is checked as follows:
It is recommended that two (2) persons perform this check.



Place a shim measuring 5 mm (

’’) between the rollers about 50

mm (2 ') from outermost end of the rollers on both the right-hand
and left-hand sides.



Turn the rollers slightly so that the shims are located between
them.



Check to make sure that the rollers are just barely squeezing on
the shims.

•

If the distance between the rollers is too great:

→

»Reduction of distance between rollers« Page 78

•

If the distance between the rollers is too little:

→

»Reduction of distance between rollers« Page 80

5 mm (

’’)

Shim

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands