Kubota DMC 8028 Operator'S Manual Download Page 199

Page: 199 / 219

Maintenance

199

Friction clutch

As required

→

»Maintenance intervals« Page 104

80xx model

The friction discs on the friction clutch are changed as follows:



Open the protection and dismantle the lock on the friction clutch.



Pull the P.T.O. shaft back, free of the drawbar.

WARNING

Safety concerning maintenance work on the transmission

When working on the transmission the tractor must be stopped
and secured.
This prevents the machine from suddenly starting to rotate.
Failure to follow the safety instructions may result in serious
injuries.

When working on the transmission:

•

The P.T.O. is disengaged.

•

Lower the implement to the ground.

•

The hydraulic controls is in neutral.

•

The tractor engine must be stopped.

•

The ignition key is removed.

•

The parking brake is set.

•

Secure the tractor to prevent it from rolling.

Failure to secure the tractor to prevent it from rolling could
endanger lives.

Guard

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands