Kubota DMC 8028 Operator'S Manual Download Page 204

Page: 204 / 219

Maintenance

204



Affix the cover.



Fit the bolts.

Accumulator

As required

The machine is fitted with an accumulator that can absorb excess
shock from the cutting unit when the machine is in its transport mode.

Pressure in the accumulator: 145 bar. (2105 psi).

The accumulator may only be replaced by authorized service
personnel.

Bolts

WARNING

Very high amount of accumulated pressure in the
accumulator

Do not attempt to replace the accumulator.
The accumulator contains a very high level of accumulated
pressure and may only be taken apart by authorized persons.
Attempting to replace the accumulator can lead to serious or fatal
injury.

Accumulator

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands