8-9
– Mount the lock ring
1
in the respective position on the jet needle
2
(2nd notch from the top – see technical specifications).
– Insert the spring
3
in the jet needle holder
4
and position in the
throttle slide together with the jet needle. Clip the jet needle holder
into place.
NOTE: a small air jet
5
should be mounted in the tab of the throttle
slide diaphragm.
– Insert the throttle slide and diaphragm
6
in the carburetor, pushing
the jet needle in the needle jet (see arrow).
– Mount the throttle slide spring and screw on the diaphragm cover
7
.
– Fit the starter cable in the piston and screw on the connection for the
electric starter system
8
.
See pages 8-11 to adjust the starter cable.
– Insert the fuel connection
9
in the bore with new O-rings.
3
4
5
7
8
9
1
2
6
