6-4
Repair manual KTM LC8
Art.-Nr
. 3.206.009-E
Transmission
– Simultaneously push both transmission shafts into the bearing seats.
NOTE: pay attention to the spacing washer on the countershaft.
– Slide the washer on the counter shaft and mount the lock ring
1
.
– Move the engine into a horizontal position.
– Insert the lower gearshift rail springs in the bores with the tapered
ends down.
– Position the shift forks
2
in the shift grooves and tilt aside, paying
attention to the shift rollers
3
– fix with grease if necessary. Mount
the shift drum
4
and allow the shift forks to engage in the shift
drum.
NOTE: since 3 different shift forks are used they cannot be confused
with each other.
– Mount the gearshift rails
5
, paying attention to the lower gearshift
rail springs. Insert the upper gearshift rail springs in the gearshift rails
with the tapered ends up.
NOTE: the longer gearshift rail is used for the countershaft shift forks.
– Insert the oil rail for transmission lubrication
6
in the bore and turn
to engage the locking pin.
1
5
5
6
4
2
2
2
3
3
3