12-8
Checking the clutch lining
– Remove the lock clip on the foot brake lever bolt and pull out the
bolt.
– Loosen the bearing bolt on the foot brake lever and remove the foot
brake lever.
– Dismount the clutch lining (see Chapter 4).
– Measure the total height of the clutch disk package (all of the lining
disks and steel disks together)
Wear limit: 48.0 mm
– Check the clutch disks for damage (breakage, recesses).
Checking the clutch pressure booster system
– Check the outer and inner part for wear and breakage, especially near
the pressure areas
1
and the toothing
2
.
– Assemble the clutch again (see Chapter 6).
– Mount the foot brake lever, secure the bearing bolt with Loctite 243
and tighten to 25 Nm.
– Mount the foot brake lever bolt and attach the lock clip.
1
1
1
1
2
