6-12
Repair manual KTM LC8
Art.-Nr
. 3.206.009-E
Oil screen
– Insert the oil screen
1
in the opening in the case.
NOTE: the oil screen has a TOP marking
2
which must point up.
– Mount the oil screen cover; tighten the two M6x35/M6x40 bolts to
10 Nm.
Water pump
– Mount the water pump wheel
3
and disk on the shaft. Hold with
the holding spanner 600.29.082.000, secure the bolt
4
M6x15 with
Loctite 243 and tighten to 10 Nm.
– Mount the dowel pins and replace the O-ring gasket.
– Mount the water pump cover
5
with 4 M6x60 bolts. Tighten to
10 Nm.
1
2
4
5
3
