6-14
Repair manual KTM LC8
Art.-Nr
. 3.206.009-E
– Push the double timing gear down into the chain tunnel draw the
timing chain along the side on the inside.
– Use the wire hook
A
to lift the side of the chain on the inside over
the gear teeth
1
onto the chain teeth
2
of the double timing gear.
Hold the double timing gear towards the outside by inserting your
finger through the hole in the bearing bolt.
– Mount and grease a new O-ring on the bearing bolt
3
of the double
timing gear.
– Lift the double timing gear, insert the bearing bolt on the double
timing gear and the needle bearing into the cylinder head and tighten
to 30 Nm.
A
3
1
2
