4-9
Clutch
– Remove the bolts on the clutch springs crosswise and lift off the
pressure cap.
– Pull out the clutch push rod.
– Insert a wire hook in the recess in the clutch disks and pull all of the
clutch disks out of the clutch hub.
NOTE: leave the spring washer and supporting ring in the clutch. They
will be detached together with the inner clutch hub, at which time they
can be easily removed.
– Slip on the holder for the inner clutch hub
A
600.29.003.000,
counteract the inner clutch hub and loosen the nut.
– Pull off the inner clutch hub together with the clutch pressure booster
and the underlying washer, which usually adheres to the inner clutch
hub.
NOTE: you do not need to dismount the primary pinion if you are only
replacing the outer clutch hub:
– Remove the engine locking bolt 0113 080802.
– Continue turning the crankshaft until the flat part of the pickup ring
1
coincides with the teeth on the outer clutch hub.
– Pull the needle bearing
2
out of the outer clutch hub with a suitable
screwdriver, carefully pushing the outer clutch hub back and forth.
– Press the outer clutch hub away from the primary pinion and remove.
NOTE: the gear for the oil pump drive is located on the back of the
outer clutch hub and can easily fall down.
1
2
A
