41/THROTTLE VALVE BODY
163
Loctite
®
648™
Info
Tighten by hand only, do not use a tool.
–
Press
"Continue"
.
–
Open and close the throttle grip fully ten times.
The
"Continue"
button appears.
–
Press
"Continue"
.
–
Check the voltage value.
Info
The
"Continue"
button only appears if the measured value equals the set-
point value.
Throttle position sensor circuit A
Emergency running position - volt-
age
"THAD"
0.70… 0.74 V
» If the displayed value is not equal to the setpoint value:
–
Repeat the setting.
601135-10
–
Fix fuse cover
with locking varnish.
600946-11
–
Use
"Continue"
to start the
"Adjusting the position of the throttle grip sensor"
menu.
–
Check the voltage value.
Info
The
"Continue"
button only appears if the measured value equals the set-
point value.
Throttle grip sensor
Voltage
"APAD"
0.70… 0.74 V
» If the displayed value is not equal to the setpoint value:
–
Loosen screws
.
–
Adjust the accelerator position sensor
by turning to the specified value.
–
Tighten screws
.
–
Press
"Continue"
.
–
Open and close the throttle grip fully ten times.
The
"Continue"
button appears.
–
Press
"Continue"
.
–
Check the voltage value.
Info
The
"Continue"
button only appears if the measured value equals the set-
point value.
Throttle grip sensor
Voltage
"APAD"
0.70… 0.74 V
» If the displayed value is not equal to the setpoint value:
–
Repeat the setting.
Summary of Contents for 690 SMC 2008
Page 1: ...REPAIR MANUAL 2008 690 SMC EU 690 SMC AUS UK 690 SMC USA Article no 3206042en...
Page 2: ......
Page 185: ...183...
