02/HANDLEBAR, INSTRUMENTS
27
6.1
Handlebar position
0
0
B
B
0
0
A
A
400271-11
On the upper triple clamp, there are 2 holes at a distance
to each other.
Distance
between holes
15 mm (0.59 in)
The holes on the handlebar support are placed at a distance
from the center.
Distance
between holes
3.5 mm (0.138 in)
The handlebar can be mounted in 4 different positions. In this way, the handlebar can
be installed in the position most comfortable for the rider.
6.2
Adjusting handlebar position
0
0
2
2
0
0
1
1
400271-10
–
Remove the four screws
. Remove the handlebar clamp. Remove the handlebar
and lay it to one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.
–
Remove the two screws
. Remove the handlebar support.
–
Place the handlebar support in the required position. Fit and tighten the two
screws
.
Guideline
Screw, handlebar support
M10
40 Nm
(29.5 lbf ft)
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure cables and wiring are positioned correctly.
–
Position the handlebar clamp. Fit and evenly tighten the four screws
.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)
Loctite
®
243™
6.3
Checking the play in the throttle cable
400192-10
–
Move the handlebar to the straight-ahead position. Move the throttle grip back-
wards and forwards to ascertain the play in the throttle cable.
Throttle cable play
3… 5 mm (0.12… 0.2 in)
» If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable. (
Danger
Danger of poisoning
Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and let it run idle. Move the handlebar to and fro over the entire
steering range.
The idle speed must not change.
» If the idle speed changes:
Summary of Contents for 690 SMC 2008
Page 1: ...REPAIR MANUAL 2008 690 SMC EU 690 SMC AUS UK 690 SMC USA Article no 3206042en...
Page 2: ......
Page 185: ...183...
