KTM 690 SMC 2008, Repair Manual

Page: 147 / 227

30/ASSEMBLING THE ENGINE
145
300011-11
–
Insert the oil filter

.
–
Lubricate the O-ring of the oil filter cover. Install the oil filter cover

.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
19.29
Installing gear position sensor
300007-11
–
Mount the contact springs

and contact bolt

.
The contact bolts are mounted with the flat side forward; the pointed sides
face the sensor.
–
Position O-ring

.
302126-11
–
Install the gear position sensor

.
–
Position the ground wire

.
–
Mount and tighten the screws.
Guideline
Screw, gear sensor M5 5 Nm
(3.7 lbf ft)
Loctite ® 243™
19.30
Installing the spacer
302140-10
–
Grease spacer

in area

and O-ring

before mounting.
Long-life grease ( p. 206)
–
Position the O-ring in the cut-out of the spacer.
302124-10
–
Grease the shaft seal ring.
Long-life grease ( p. 206)
–
Slide the spacer with the O-ring onto the countershaft with a twisting motion.
The cut-out with the O-ring faces inward.
The shaft seal ring rests against the spacer along its entire circumference.