KTM 690 SMC 2008, Repair Manual

Page: 93 / 227

30/ENGINE
91
300223-11
–
Install the screw and nut

of the lower engine bracket, but do not tighten them
yet.
300222-10
–
Remove the floor jack with the special tool.
Floor jack attachment (75029055000) ( p. 215)
300221-11
–
Position the engine bearer.
–
Mount and tighten screws

.
Guideline
Screw, engine bearer on frame M10 45 Nm
(33.2 lbf ft)
–
Mount and tighten screw

with nut.
Guideline
Engine carrying screw M10 45 Nm
(33.2 lbf ft) Loctite ® 243™
–
Tighten the swingarm pivot.
Guideline
Screw, swingarm pivot M12x1.75 80 Nm (59 lbf ft)
–
Tighten the lower engine bracket.
Guideline
Engine carrying screw M10 45 Nm
(33.2 lbf ft) Loctite ® 243™
300220-11
–
Position the hoses of the engine breather, the SLS and the oil return line. Mount
the spring-loaded band-type clamp

using the special tool.
Pliers for spring-loaded band-type clamp (60029057100) ( p. 210)
300219-11
–
Attach the spark plug connector.
–
Plug in the connector of the engine coolant temperature sensor

.