38/LUBRICATION SYSTEM
156
22.8
Cleaning the oil screens
Warning
Danger of scalding
Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Place a suitable container under the engine.
100205-10
–
Remove screw plug
with oil screen
and the O-rings.
100206-10
–
Remove screw plug
with oil screen
and the O-rings.
–
Completely drain the remaining engine oil.
–
Thoroughly clean the parts and sealing area.
100207-10
–
Position oil screen
with the O-rings.
–
Mount and tighten screw plug
with the O-ring.
Guideline
Plug, oil screen
M20x1.5
15 Nm
(11.1 lbf ft)
100208-10
–
Position oil screen
with the O-rings.
–
Mount and tighten screw plug
with the O-ring.
Guideline
Plug, oil screen
M20x1.5
15 Nm
(11.1 lbf ft)
Summary of Contents for 690 SMC 2008
Page 1: ...REPAIR MANUAL 2008 690 SMC EU 690 SMC AUS UK 690 SMC USA Article no 3206042en...
Page 2: ......
Page 185: ...183...
