KTM 690 SMC 2008, Repair Manual

Page: 94 / 227

30/ENGINE
92
300218-11
–
Reconnect plug connectors

of the gear position sensor, the crankshaft position
sensor and the alternator.
300217-11
–
Position the throttle valve body.
–
Position and tighten hose clip

.
300216-11
–
Position the electrical connection

on the starter motor. Mount and tighten screw.
Guideline
Screw, starter cable on starter M5 3 Nm (2.2 lbf ft)
–
Position the ground wire on the starter motor. Mount and tighten screw

.
Guideline
Screw, starter motor M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
300214-11
–
Insert the clutch push rod.
–
Position the clutch slave cylinder.
–
Mount and tighten screws

.
Guideline
Screw, clutch slave cylin-
der M6x20 10 Nm
(7.4 lbf ft) Loctite ® 243™
Screw, clutch slave cylin-
der M6x35 10 Nm
(7.4 lbf ft)
–
–
Mount the engine sprocket with the chain.
–
Position the new lock washer and mount nut

but do not tighten yet.
300215-11
–
Position the rear wheel.
–
Mount the chain adjuster and nut.
–
Push the rear wheel forward so that the chain adjusters are on the tensioning
screws, and tighten the nut

.
Guideline
Nut, rear wheel spindle M25x1.5 90 Nm
(66.4 lbf ft)
300214-12
–
Have an assistant operate the rear brake.
–
Tighten the engine sprocket nut.
Guideline
Nut, engine sprocket M20x1.5 60 Nm
(44.3 lbf ft) Loctite ® 243™
–
Secure the nut with the lock washer.