KTM 690 SMC 2008, Repair Manual

Page: 88 / 227

14/LIGHT SYSTEM, INSTRUMENTS
86
600612-10
–
Pull bulb socket

out of the reflector.
–
Pull parking light bulb

out of the bulb socket.
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) ( p. 173)
–
Insert the bulb socket in the reflector.
–
Insert the rubber cap.
–
Install the headlight mask with the headlight. ( p. 85)
15.11
Changing the headlight bulb
Note
Damage to reflector
Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Remove the headlight mask with the headlight. ( p. 84)
600610-10
–
Pull off connector

.
–
Take off rubber cap

of the headlight bulb.
600611-10
–
Detach spring bar

.
–
Remove headlight bulb

.
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) ( p. 173)
–
Fix the headlight bulb in the headlight using the spring bar.
–
Replace the rubber cap. Attach the connector.
–
Install the headlight mask with the headlight. ( p. 85)
15.12
Changing the flasher bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
100160-10
–
Remove the screw from the rear of the flasher housing.
–
Tilt headlamp diffuser

forward carefully and take it off.
–
Press the flasher bulb carefully into the socket, turn it counterclockwise by about
30°, and take it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new flasher bulb carefully into the socket and turn it clockwise until it
stops.
Turn signal (RY10W / socket BAU15s) ( p. 173)
–
Position the diffuser.